Review Heatmiser Programmable Room Thermostat - PRT/HW V3With so many on offer today, it is good to have a brand you can recognise. The Heatmiser Programmable Room Thermostat - PRT/HW V3 is certainly that and will be a superb acquisition. For this reduced price, the Heatmiser Programmable Room Thermostat - PRT/HW V3 comes widely recommended and is a popular choice for most people.
- 5/2 day Heating Program
- 5/2 day Hot water Program
- Optimum Start
- Up to 4 changes in room temperature
- Adjustable Frost Protection (7-12°C)
Product Description
The PRT/HW can be used as an upgrade to your existing room thermostat as long as you have 3 wires (not counting the earth)
The PRT/HW also includes a timer output for the hotwater, but you dont need to use this.
How to upgrade? Simply set your heating programmer to constant, fit the Heatmiser PRT/HW and then program the heating times and temperatures from a single point. As long as you have three wires (exc earth), you should be fine to upgrade. You can always call 01254 870303 to check.
The following features are available;
- Large display
- Optimum Start
- °C / °F Selectable
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- 30 minute timing increments
- 5/2 day Heating Program
- 5/2 day Hot water Program
- Up to 4 changes in room temperature
- Key Locking Facility
- Adjustable Frost Protection (7-12°C)
- Easily increase or decrease the required temperature
- Remote control optional
- Supply: 230v
- Outputs: Volt free 3A Max
- Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)
- Supplied with a 2 Year Warranty
(The PRT/HW is flush mounting, so you will need to install a back box prior to installation. 13mm depth is after installation)