Review HG Satin Gloss Polish (Golvpolish) 5 litreWith so many on offer recently, it is good to have a brand you can recognise. The HG Satin Gloss Polish (Golvpolish) 5 litre is certainly that and will be a great acquisition. For this great price, the HG Satin Gloss Polish (Golvpolish) 5 litre comes widely respected and is a regular choice for many people.
- Unique removable satin gloss polish and sealer for unglazed quarry tiles, natural stone floortiles and slate.
- Helps prevent staining, enhances colour and texture of the stone. Golvpolish is self-shining and gives a non-slippery finish.
- Apply a very thin film of HG Satin Gloss Polish (HG Golvpolish).
- Consequently, the pores are completely sealed and dirt cannot penetrate into the substructure.
- Coverage: 40 m² per litre per layer . Two coats (recommended) 20 m² per litre.
Unless expressly indicated otherwise, Amazon.co.uk is not the manufacturer of the products sold on this site. Actual product packaging and materials may contain more and different information than what is shown on our website. We recommend that you do not rely solely on the information presented on our website. Please always read labels, warnings, and directions provided with the product before using or consuming the product. Please see our full disclaimer below.
Product Description
Directions for use: Prior to applying HG Golvpolish the floor should be thoroughly cleaned preferably with HG Cement Grout Film Remover (HG Extra) to clean off cement film and lime or HG Polish, Wax and Dirt Remover (HG Remover) to clean off grease, old layers of wax and dirt. After wet cleaning, the floor should be left to dry thoroughly for 3 days. With floor heating 24 hours. Turn off your floor heating 12 hours before treatment. On porous surfaces such as slate, brick or flagstones first use HG Impregnating Sealer (HG Impregnator) .
To avoid foam, do not stir or shake the bottle before use. HG Golvpolish should be applied with a Non-Fluffy Cloth wrapped around a Floor Wiper or, on rough surfaces, use a Mohair Paint Roller.
Pour some Golvpolish onto the cloth and always spread the polish in one direction. Do not rub or buff. Once the Golvpolish has dried after approx. 40 minutes a second coat should be applied at right angles. Dries after 3 hours, but allow three days for the Golvpolish to become fully water resistant.
Maintenance: With HG Superfloor Shine Cleaner. To strip off old coats of HG Golvpolish annually use HG Polish, Wax and Dirt Remover (HG Remover) .
For extra maintenance and shine (for example in high traffic areas/walkways) mop once a month with a dilution of 50ml (half a cup) of Golvpolish in 5 litres of water.